Table of Contents
Advertisement
Install the battery
stowed.
Refit the battery cover (18).
Press the illumination button
15 seconds.
(18.2)
(18.1)
(18)
Adjustments
To enable the payload to be correctly balanced, the wedge adaptor may require repositioning.
The following adjustments may be necessary after prolonged use:
The platform slide clamp may require adjustment.
The pan and tilt brakes may require adjustment.
The pan and tilt drag controls may require adjustment.
Repositioning the wedge adaptor
The wedge adaptor
(14)
adaptor into the sliding plate (13). The wedge adaptor may be fitted in three positions.
WARNING! Overlong screws will prevent the sliding plate from operating.
(18.1)
in the battery compartment, ensuring that the wiring is neatly
(10)
and ensure that the level bubble
Fig 4 Level Bubble Battery Replacement
is secured by four cap head screws
Always use the screws provided (M6 x 30 mm).
(9)
is lit for approximately
(10)
(9)
(15)
which pass through the wedge
Back
19
Advertisement
Table of Contents
