Table of Contents
Advertisement
Image 4-12
4.8
Preferences
4.8.1
Language
List of languages
The list of selectable languages is depending on the software of the projector.
How to change the Language ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Language
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired language (image 4-14)
7. Press ENTER
The language is adapted and a black bullet shows the active configuration.
Image 4-14
R5976837 BARCO ID R600/R600+ 21/09/2006
Downloaded From projector-manual.com Barco Manuals
The use of a sheet of paper held in front of the screen can be useful to determine the focus plane (position
for best focus)
Vertical shift range : -120% to 120%
Image 4-13
4. Setup
29
Advertisement
Table of Contents
