Table of Contents
Advertisement
Image 6-18
6.4.1.1
Contrast
Contrast adjustment
Adjust the contrast to "brighten" the white parts of the image.
How to change the contrast
1. Press MENU to activate the Toolbar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Contrast
7. Press ENTER
On the screen appears now a sliderbox (image 6-19)
8. Use ←or → , the numeric keys on the remote, or the keypad to change the contrast
Image 6-19
6.4.1.2
Brightness
Brightness adjustment
Adjusting the brightness will affect the dark areas of the image. Increase the brightness to "lighten" up the parts that are too dark.
How to change the Brightness ?
1. Press MENU to activate the Toolbar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↓ or ↑ to select Brightness
7. Press ENTER
On the screen appears now a sliderbox (image 6-20)
8. Use ←or → , the numeric keys on the remote, or the keypad to change the Brightness
R5976837 BARCO ID R600/R600+ 21/09/2006
Downloaded From projector-manual.com Barco Manuals
It is recommended to adjust the brightness before adjusting the contrast.
6. Advanced
47
Advertisement
Table of Contents
