Table of Contents
Advertisement
6. Advanced
Image 6-12
How to mute an Audio channel ?
1. use the arrow keys to select the desired mute box
2. Press ENTER
How to link an audio input to a source ?
1. use the arrows to select the desired scroll box
2. Press ENTER to open the scroll box
3. use ↑ or ↓ to select the source
4. Press ENTER
6.3.4.2
Audio Settings
Audio Settings
1. Press MENU to activate the Tool bar
2. Press → to select General
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Audio setup (image 6-13)
5. Press ENTER
A dialog box is displayed (image 6-14)
6. Use the arrow keys to select and change the settings
Note: The default value for the volume is 43, this corresponds to a gain factor of 1 (volume in = volume out).
Image 6-13
44
Downloaded From projector-manual.com Barco Manuals
When the source switching mode is the fade in/out mode, the audio switching will also be done using a fade
in/out effect.
R5976837 BARCO ID R600/R600+ 21/09/2006
Advertisement
Table of Contents
