Table of Contents
Advertisement
How to blank the image ?
1. Press MENU to activate the Toolbar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Blanking
5. Press ENTER
A slider box is displayed (image 6-118)
6. Use ←or →, the numeric keys on the remote, or the keypad to change the blanking.
Image 6-118
6.9.10 Soft Edge
Overview
•
Introduction
•
Soft Edge overlap zone (horizontal Soft Edge)
•
Soft Edge border adjustment
•
Black level of the images
6.9.10.1 Introduction
Why Soft Edge?
When working in a multichannel setup the projector and its Soft Edge possibilities allow an image blending that gives the appearance
of a single view.
R5976837 BARCO ID R600/R600+ 21/09/2006
Downloaded From projector-manual.com Barco Manuals
Use the checkboxes to enable/disable the blanking
Use the Reset key to reset the blanking values.
The logo is also affected by the blanking
6. Advanced
101
Advertisement
Table of Contents
