Table of Contents
Advertisement
6. Advanced
Image 6-46
Dynacolor™ g (Light Output) Value
The value g in the Dyancolor™ interface represents a relative light output.
g=1 is the maximum available light output.
62
Downloaded From projector-manual.com Barco Manuals
Assume we have a projector. L=1 in the Dyancolor™ interface will correspond with a 'maximum full white
light' output of x Lumens.
Important ! In the projectors iD R600 and iD Pro R600 (R9010340 and R9010350) the measuring is done with
white peaking = 0.
In the projectors iD R600+ and iD Pro R600+(R9010341 and R9010351) however, the white peaking must be 10
during the measurement.
The dialogbox shown here are as displayed in the iD R600 and iD Pro R600 (with the field White ).The dialogbox
displayed in the iD R600+ and iD Pro R600+ contain the field White+ instead of White.
R5976837 BARCO ID R600/R600+ 21/09/2006
Advertisement
Table of Contents
