How to select a computer input ?
1. Press 2 on the RCU
Note: Another way for selecting this input is via the Menu.
3.5.2.8
Serial Digital Interface (Optional)
Input specifications
SDI input : BNC
SDI output : BNC (=loop through)
typical : 0.8 Vpp
75Ω terminated
output impedance: 75Ω
Image 3-16
How to select the SDI input
1. Press 7 on the RCU
Note: Another way for selecting this input is via Source on the local keypad or via the Menu.
3.5.2.9
Audio input/Output (Optional)
Input specification
Typical = 200 mV
Max = 4V
pp
Mono/Stereo
Output specification
V
+20dB / -∞ dB
in
Max = 4 V
pp
R5976837 BARCO ID R600/R600+ 21/09/2006
Downloaded From projector-manual.com Barco Manuals
Composite sync only possible on Green
SDI
Serial Digital Interface
The SDI is located on Layer3 which is an optional Layer.
3. Installation
19