Composite sync only possible on Green
How to select a computer input ?
1. Press 2 on the RCU
Note: Another way for selecting this input is via the Menu.
3.5.2.8
Serial Digital Interface (Optional)
SDI
Serial Digital Interface
Input specifications
SDI input : BNC
SDI output : BNC (=loop through)
typical : 0.8 Vpp
75Ω terminated
output impedance: 75Ω
Image 3-16
How to select the SDI input
1. Press 7 on the RCU
Note: Another way for selecting this input is via Source on the local keypad or via the Menu.
The SDI is located on Layer3 which is an optional Layer.
3.5.2.9
Audio input/Output (Optional)
Input specification
Typical = 200 mV
Max = 4V
pp
Mono/Stereo
Output specification
V
+20dB / -∞ dB
in
Max = 4 V
pp
R5976837 BARCO ID R600/R600+ 21/09/2006
3. Installation
19