Nortel M2016S Quick Reference Manual page 21

ATQn
ATVN
ATXn
ATSn?
ATSn=x
ATZ
ATCn
ATEn
ATTSP!
AT&Cn
AT&Dn
AT&Rn
Meridian Communications Adapter
- Result Code (n= 0, 1; if n= 0 then results are
sent)
- Verbal Result (n= 0, 1; if n= 0 then numeric
codes are sent
- Result Code Selection (n= 0, 1; if n=1 then
extended results)
- Read S-register (n= number of S-register to
read)
- Write S-register (n= S-register number, x= new
value)
- Soft Reset (reset to default parameters)
- Carrier Detect (n= 0, 1; if n= 1 then carrier
detect is enabled)
- Echo (n= 0, 1; if n= 1 then commands will
echo back to the terminal)
- Transparent Mode
- Carrier Detect control (n= 0, 1; if n= 1 then
Carrier Detect is asserted)
- DTR response (n= 0 - 3; when DTR status
changes: if n= 0 then ignore;
if n= 1 then go off line; if n= 2 then release the
call; if n= 3 then release the call and return
Hayes parameters to default)
- Clear-to-send (n= 0, 1; if n= 1 then CTS is
always present)
20