Access Control - Dinstar UC100 User Manual

PPPoE:
PPPoE is an acronym for point-to-point protocol over Ethernet, which relies on two widely accepted
standards: PPP and Ethernet. PPPoE is a specification for connecting the users on an Ethernet to the Internet
through a common broadband medium, such as a single DSL line, wireless device or cable modem. PPPOE
IP address refers to IP address assigned through the PPPoE mode.
If you choose PPPoE, you need to fill in to fill in the following information:
Username: the account name of PPPoE

Password: the password of PPPoE

Server Name: the name of the server where PPPoE is placed

Note: The default IP address of WAN port is a DHCP IP address, but in actual conditions, the IP address of
WAN port is more often set as a static IP address.

4.5.2 Access Control

The access ports of Web, Telnet and SSH, as well as relevant on-off controls, can be configured on the
Access Control interface. Web supports http and https, while SSH supports OAuth 2.0 protocol.
UC100 User M anual Copyright @ 2011-2015 Dinstar
28