Dinstar UC100-1T1S1O User Manual
  1. Manuals
  2. Brands
  3. Dinstar Manuals
  4. Gateway
  5. UC100-1T1S1O
  6. User manual

Dinstar UC100-1T1S1O User Manual

Universal gateway
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
UC100-1T1S1O Universal Gateway
User Manual V1.0
User Manual V2.1
Shenzhen Dinstar Co., Ltd.
th
Address: 9
Floor, Guoxing Building, Changxing Road, Nanshan District, Shenzhen, China
Postal Code: 518052
Telephone: +86 755 61919966
Fax: +86 755 2645 6659
Emails: sales@dinstar.com, support@dinstar.com
Website:
www.dinstar.com
I
UC100-1T1S1O User Manual
Copyright©2011-2016 Dinstar

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UC100-1T1S1O and is the answer not in the manual?

Questions and answers

Related Manuals for Dinstar UC100-1T1S1O

Summary of Contents for Dinstar UC100-1T1S1O

  • Page 1 UC100-1T1S1O Universal Gateway User Manual V1.0 User Manual V2.1 Shenzhen Dinstar Co., Ltd. Address: 9 Floor, Guoxing Building, Changxing Road, Nanshan District, Shenzhen, China Postal Code: 518052 Telephone: +86 755 61919966 Fax: +86 755 2645 6659 Emails: sales@dinstar.com, support@dinstar.com Website: www.dinstar.com...
  • Page 2 Preface Welcome Thanks for choosing the UC100-1T1S1O Universal Gateway! We hope you will make full use of this rich-feature gateway. Contact us if you need any technical support: 86-0755-26456110/112. About This Manual This manual provides information about the introduction of the gateway, and about how to install, configure or use the gateway.

  • Page 3: Table Of Contents

    2.4.4 Log In Web Interface ..........................10 3 Basic Operation ..........................11 3.1 Methods to Number Dialing ........................... 11 3.2 Call Holding ..............................11 3.3 Call Waiting ..............................11 3.4 Call Transfer ..............................11 3.4.1 Blind Transfer ............................11 UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 4 5.3.5 Service Log ............................29 5.3.6 Config Changes Log ..........................29 5.3.7 Backup/Restore/Upgrade ........................30 5.3.8 GSM Tools ............................31 5.3.9 Voice ..............................32 5.3.10 Command Line ............................ 32 5.3.11 Diagnostics ............................32 5.3.12 Cloud Server ............................33 UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 5 5.8 Call Control ..............................81 5.8.1 Setting ..............................82 5.8.2 Route Group ............................83 5.8.3 Route ..............................84 5.8.4 Feature Code ............................86 5.8.5 IVR................................ 87 5.8.6 SMS Route ............................89 5.8.7 SMS ..............................90 UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 6 Contents 5.8.8 USSD ..............................91 5.8.9 Diagnostics ............................92 6 Glossary............................93 UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 7: Product Introduction

    Besides, the gateway has built-in WiFi and high-speed data handling capacity, allowing users to enjoy high-speed internet surfing through WiFi or LAN ports. UC100-1T1S1O is ideally suitable for personal use. Meanwhile, it is perfect for small and micro enterprises, offering high-speed internet access, good voice service and message service.

  • Page 8: Product Appearance

    Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Application Scenario of UC100-1T1S1O Figure 1-1 SMS/USSD (Data)

  • Page 9: Features & Functions

    FXS/FXO/LTE interface on a single gateway  Send/receive calls from PSTN/PLMN via FXO  Flexible dial plan and routing strategies based on time, number and source IP etc.   IVR Customization  Support high-speed NAT forwarding and WIFI hotspot UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 10: Physical Interfaces

     DTMF: RFC2833/Signal/Inband  1.5.4 FXS Connector: RJ11  Caller ID: Bellcore Type 1&2, ETSI, BT, NTT and DTMF  Answer and Disconnect Signaling: Answer, Disconnect, Busy Tone   Polarity Reversal Hook Flash  UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 11: Fxo

     Call Waiting and Call Holding Call Transfer (Blind & Attended)  Intra-group Pick-up  Hotline   No Disturbing Three Parites Conversation  1.5.8 Environmental Power Supply: 12VDC, 1A   Power Consumption: 10W UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 12: Maintenance

    Quick Installation 2.1 Installation Attentions To avoid unexpected accident or device damage, please reed the following instructions before installing the UC100-1T1S1O gateway. The adapter of the gateway accepts DC input voltage of 12V. Please ensure stable and  safe power supply;...

  • Page 13: Installation Steps

     2.3 Network Connection UC100-1T1S1O works in two network modes: route mode and bridge mode. When it is under the route mode, the IP address of WAN port must be different from the IP address of LAN port. But when it is under the bridge mode, the IP address of WAN port and that of LAN port are the same.

  • Page 14: Network Connection Diagram Under Bridge Mode

    Under the Bridge mode, the IP address of WAN port is the same with that of LAN port. Generally, when the gateway works under the bridge mode, the IP address of the gateway has been modified. In the following diagram, it is assumed that the IP address has been modified into 172.16.80.1. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 15: Connect Gateway To Network

    LAN1 LAN2 UC100-1G1S1O Note: The IP address of PC and that of WAN port of the UC100-1T1S1O gateway are at the same network segment. 2.4 Connect Gateway to Network The above network diagrams show how to connect the gateway to network through network ports.

  • Page 16: Preparations For Login

    UC100-1T1S1O gateway, since the default IP address of LAN port of the gateway is 192.168.11.1. Check the connectivity between the PC and the UC100-1T1S1O. Click Start  Run of PC and enter cmd to execute ‘ping 192.168.11.1’ to check whether the IP address of LAN port runs normally.

  • Page 17: Basic Operation

    3.4 Call Transfer 3.4.1 Blind Transfer Blind transfer is a call transfer in which the transferring party connects the call to a third party without notifying the third party. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 18: Attended Transfer

    A will continue to hear a waiting tone. If it’s B that hangs up the phone at this moment, C and A go into conversation. If it’s C that hangs up the phone, B and A go into conversation. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 19: Function Of Flash-Hook

    3, the conversation will switch to A , B and C (three parties conversation). 3.6 Description of Feature Code UC100-1T1S1O provides convenient telephone functions. Connect a telephone to the FXS port and dial a specific feature code, and you can query conrresponding information.

  • Page 20: Send Or Receive Fax

    Explanation of T.38 and Pass-through T.38 is an recommendation for allowing transmission of over IP networks in real time. Under the T.38 mode, analog fax signal is converted into digital signal and fax signal tone is UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 21: Function Of Rst Button

    3.8 Function of RST Button Press the RST button for different time length, and the UC100-1T1S1O device will execute different function: 1. On the condition that the device is running normally, press the RST button for 0 to 3 seconds, the system will not execute any function.

  • Page 22: Query Ip Address And Restore Default Setting

    LAN port and dial *159 to query the IP address of WAN port. If you want to restore UC100-1T1S1O to default settings, you can press the RST button for more than 6 seconds or you can configure it on the Web interface.

  • Page 23: Configuration Wizard

    Figure 3-2 Reset to Defaults Configuration Wizard 4.1 Configuration Wizard The following are the common ways to configure the UC100-1T1S1O gateway. 4.1.1 UC100 Regarded as Terminal and Registered to SIP Server 1. UC100-1T1S1O Registered to SIP Server UC100-1T1S1O User Manual...

  • Page 24: Other Sip Clients Registered To Uc100

    4.1.2 Other SIP Clients registered to UC100 Under this mode, UC100-1T1S1O is regarded as an SIP Server. Create an extension account first on the Extension SIP interface, and configure listening port on the Profile  SIP interface. Then, configure the IP address, extension account and listening port of UC100-1T1S1O on SIP client.

  • Page 25: Uc100 Connected To Pbx Through Trunking

    Add Inbound and Outbound Routes 4.1.4 UC100 Serving as VPN Client Enable VPN Client on 'Network -> SIP' Interface Configure Information of VPN Server on 'Network -> SIP' Interface Configure Information of UC100 on VPN Server UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 26: Configurations On Web Interface

    Modify the IP address of PC to make it at the same network segment with that of LAN port of the UC100-1T1S1O gateway (the default IP of LAN port is 192.168.11.1). Open a web browser on the PC and then enter the IP address of LAN port. Click Login, and the login GUI is displayed.

  • Page 27: Status

    5.2.1 Overview Log in the Web interface of UC100-1T1S1O, click Status  Overview, and the following interface will be displayed. On the interface, divice model, firmware version as well as information about performance, WAN network, LTE network, LAN network, WiFi and DHCP server are shown.

  • Page 28: Sip

    Profile The profile that is used by the SIP trunk Profile The profile that is used by the SIP extension SIP Extension SIP extension is registered or not. Status There are two statuses: Registered. Unregistered UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 29: Pstn

    There are two channel states: OK and Not register There are two SIP register statuses: Registered and SIP Register Status Unregistered Signal The signal strength of GSM Talking State There are two talking states: Idle and Busy UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 30: Dhcp Client List

    5.2.4 DHCP Client List UC100-1T1S1O has a built-in DHCP server. When the DHCP server is enabled, it can assign IP addresses to the clients connected to it. On the Status DHCP Client List interface, information of DHCP clients connected to the UC100-1T1S1O gateway, such as client name, Mac address and IP address, is shown.

  • Page 31: Service

    5.2.7 Service Click Status  Service, and the service status of UC100-1T1S1O is displayed. This function is enabled by default. The Web, SSH and Telnet service can be disabled and their ports can be modified on the Network  Access Control interface. If no running status is shown, it means exception has occurred on UC100.

  • Page 32: Setting

    If it is enabled, CDRs will be saved automatically. 5000 CDRs call be saved at most and they can be queried on the Status  CDRs interface. If it is disabled, CDRs will not be saved UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 33: User Manager

    Provision is used to make UC100-1T1S1O automatically upgrade with the latest firmware stored on an http server, an ftp server or a tftp server. As for how to configure UC100-1T1S1O and http/ftp/tftp server for Provision, please make reference to the instruction guide of Provision.
  • Page 34 The URL of the http/ftp/tftp server: For example: ftp://172.16.77.200/home tftp://172.16.77.200/provision.xml http://test.domain.com/test Username The login username of the http/ftp/tftp server Password The login password of the http/ftp/tftp server Note: Proxy Address, Proxy Username and Proxy Password are optional to be configured. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 35: Operation Log

    Note: Operation logs are generally used to locate faults by device manufacturer. 5.3.5 Service Log Service logs (the running logs of UC100-1T1S1O) can be exported on the System  Service Log interface. Those logs are used for analyzing where a problem has occurred on the gateway.

  • Page 36: Backup/Restore/Upgrade

    System, Network and Service, and then click Download Select any of the checkboxes on the left of System, Network and Service, Reset and then click Reset, and configurations related to the selected part will be UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 37: Gsm Tools

    Figure 5-18 Set BCCH You can set BCCH as ‘Default’ or as any of the neighboring BCCHs searched by the UC100-1T1S1O gateway. As shown in the above picture, the searched BCCHs include 594, 58, 559, 60, 64, 562 and 574.

  • Page 38: Voice

    Use a telephone line to connect the FXS port and the FXO port, and then connect the UC100-1T1S1O to a vailable WiFi. On the System  Diagnostics interface, select a module (FXS/FXO, GSM or WiFi) that you want to diagnose. Click Start, and the gateway will begin to diagnose the selected module(s).

  • Page 39: Cloud Server

    The UC100-1T1S1O gateway provides Cloud service. Enter the IP address, service port and password of Cloud server, the gateway will connect to the Cloud server.

  • Page 40: Network

    Figure 5-23 Reboot Device 5.4 Network UC100-1T1S1O works in two modes: route mode and bridge mode. When it is under the route mode, the IP of WAN must be different from the IP of LAN. But when it is under the bridge mode, the IP of WAN and the IP of LAN are the same.
  • Page 41 Figure 5-24 Default IP Address under Route Mode Figure 5-25 Set WAN IP as DHCP IP Note: When WAN IP is set as DHCP IP, please ensure that there is DHCP server working normally in the network. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 42 If you choose static IP address, you need to fill in the following information: IP Address: the IP address of the WAN port of the UC100-1T1S1O; ...

  • Page 43: Access Control

    The access ports of Web, Telnet and SSH, as well as relevant on-off controls, can be configured on the Network  Access Control interface. Web supports http and https, while SSH supports OAuth 2.0 protocol. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 44: Firewall

    Figure 5-28 Access Control 5.4.3 Firewall If the UC100-1T1S1O works under the route mode, you can choose to enable the firewall and set filter rules to accept or reject certain destination IP addresses. Configuration Procedures: 1. Select On in the drop-down box on the right of Filter Rules Control 2.
  • Page 45 /*: Information of Source or Destination is not completely filled in. Figure 5-30 Create Filter Rule Table 5-6 Explanation of Parameters for Filter Rule LAN IP The IP address that you want UC100 to accept or reject. It is the IP UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 46: Dhcp Server

    5.4.4 DHCP Server If there is a need, you can choose to enable the built-in DHCP server of UC100-1T1S1O to assign IP addresses to PC or other clients that are in the same local-area network with UC100. Under this condition, the UC100-1T1S1O gateway works like a router.

  • Page 47: Port Mapping

    DHCP server; it is optional to fill in 5.4.5 Port Mapping When the UC100-1T1S1O works under the route mode, port mapping allows a client in the wide-area network to visit a client in the local-area network. Configuration Procedures: 1. Click Network  Port Mapping, and the following interface will be shown.

  • Page 48: Dmz Setting

    4. Click the Save button to save the above configurations. 5.4.6 DMZ Setting When the UC100-1T1S1O gateway works under the route mode and the DMZ service is enabled, the clients in the wide-area network are allowed to have direct access to the clients in the DMZ (demilitarized zone).
  • Page 49 DNS. Instruction for using Nslookup: 1. Enter a domain name and then click Nslookup. 2. View the DNS information from the returned message. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 50: Ddns

    IP address will be sent to the DDNS, and thus user can visit the device via the new IP address or domain name and incoming calls can arrive the device via the domain name. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 51 Password The password for logging in DDNS, which is offered by service provider IP Source The source of IP address bound to the domain name, including external address and device add UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 52: Static Route

    Netmask The netmask of the static route, default: 255.255.255.0 Gateway The IP address of the outbound gateway of the static route Interface The outbound interface of the static route, namely WAN port or LAN port UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 53: Upnp Client

    For example, the public IP address of outbound router is 172.16.20.12, and the external port configured on UC100-1T1S1O is 8080. When UPnP HTTP is enabled, the router will create a port mapping from external HTTP port 8080 to intranet HTTP port 80, and thus clients in public network can visit the UC100-1T1S1O gateway which is in local-area network through entering 72.16.20.12:8080.
  • Page 54 OpenVPN is a kind of VPN based on the application layer of OpenSSL. It allows VPN clients to use a sahred key, certificates or username/password to authenticate themselves. PPTP：UC100-1T1S1O works as a PPTP client and is connected to PPTP server. Figure 5-40 UC100 Works as PPTP Client...
  • Page 55 Use the Home tab to apply 标题 1 to the text that you want to appear here. L2TP：UC100-1T1S1O works as a L2TP client and is connected to L2TP server. Figure 5-41 UC100 Works as L2TP Client Table 5-12 Explanation of Parameters for L2TP Client...

  • Page 56: Hosts

    /domain name. And the mapping relationship allows quick and convenient access to the host. Figure 5-43 Enable Hosts File 5.5 Profile The Profile menu includes the following sub-menus: SIP, FXS/FXO, Codec, Number, Time, Maniipulation and Dalplan. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 57: Sip

    On the Profile  SIP interface, you can set SIP information such as listening port, which will be used in extension and trunk. Multiple SIP profiles can be configured for one UC100-1T1S1O device, so you can choose different SIP profiles according to different needs. Figure 5-44 Configure SIP Profile UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 58 If this function is enabled, incoming calls from unknown sources are allowed. Unknown sources are those IP addresses Allow Unknown Call that do not fall into the source range configured for SIP trunks or SIP extensions UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 59: Fxs/Fxo

    On the Profile  FXS/FXO interface, you can configure the driving parameters of FXS port and FXO port, including tone standard, dial timeout, ring timeout, hook-flash detection, DTMF parameters, CID-related parameters, impedance, dialplan and so on. Figure 5-45 FXS/FXO Profile Click , and corresponding configuration interface will pop up. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 60 Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Figure 5-46 Configure FXS Parameters UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 61 When the time of dialing a digit exceeds this value, the system will think the dialing has completed; Default value is 4 seconds The timeout value for dialing the first telephone number after Dial Timeout (s) off-hook; Default value is 10 seconds UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 62 Send CID After If it is enabled, the CID will be shown after ringing; otherwise, CID Ring(ms) will be displayed before ringing Delay Timeout After The maximum interval between ringing and displaying of CID Ring (ms) UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 63 Send Flash Hook via If this parameter is on, signal of flash-hook is sent via SIP INFO SIP INFO The rules for dialing. The UC100-1T1S1O device supports regular Dialplan expression. Please make reference to Profile  Dianplan section. Figure 5-47 Configure FXO Parameters UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 64 Detect after ring: the CID will be shown after ringing; otherwise, CID will be displayed before ringing Off: the CID will not be shown DTMF Detect The timeout value to detect CID (in DTMF format) Timeout(s) UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 65: Codec

    Dialplan section. 5.5.3 Codec UC100-1T1S1O supports four codec modes, including G729, G723, PCMU and PCMA. You can adjust the priority of these four modes according to you needs. Figure 5-48 Add or Delect Codec Profile : Edit codec profile. : Delete the corresponding codec profile or a codec mode.

  • Page 66: Number

    Figure 5-49 Number Profile : Edit number profile. : Delete the corresponding number profile Click , and you will see the following interface: Figure 5-50 Create Number Profile UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 67 Mark any digit, equal to [0-9 ] Mark any character that is not a digit, equal to [^0-9 ] Mark any blank character such as a space or a tab. Mark any character that is not a blank character Examples: UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 68: Time

    Configure the starting date and ending date of a period Date Period : Add a date period : Delete a date period Weekdate Choose a weekdate Time Period Choose the starting time and ending time of a day UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 69: Manipulation

    If the checkbox on the right of Caller is selected, it means the caller number will be manipulated; if the checkbox on the right of Called is selected, it means the called number will be manipulated. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 70: Dialplan

    Matches any one character except those enclosed in [ ]. For example, [^9] matches any character except 9. Matches any single character except the newline character. For example, 3.4 matches 314, 324, 334, 344. Indicates there is zero or one of the preceding element. For UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 71 Matches 0 or 1 times of the preceding element Examples of DigitMap Syntax Matches the phone numbers with stating digits as (13 | 15 | 18)xxxxxxxxx 13, 15 or 18 and the left nine digits as any of 0 to 9 UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 72: Extension

    5.6 Extension 5.6.1 On the Extension  SIP interface, you can configure the SIP accounts registered in the UC100-1T1S1O by SIP clients (hereby UC100-1T1S1O is regarded as a SIP server). Figure 5-54 Configure SIP Extension UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 73: Fxs

    IP address of public network, thus making NAT traversal possible SIP Profile The SIP profile that is selected for the extension If it is enabled, this SIP extension is registered to UC100-1T1S1O; Status Otherwise the SIP extension is not registered 5.6.2 On the Extension ...
  • Page 74 Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Figure 5-55 Configure Parameters of FXS Extension UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 75 Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 76 The receiving gain of the FXS port Output Gain The sending gain of the FXS port Work Mode The working mode of the FXS port, including Voice and POS FXS Profile The FXS profile that is selected for this FXS extension UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 77: Ring Group

    Sequence (Ascending), Sequence (Cyclic Ascending), Simultaneous and Random Ring Group The number of the ring group; it is generally the same with DID. Number Same with Ring Group Number; it is optional to fill in UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 78: Trunk

    Note: If ring group function has been set, the call forwarding function is unavailable. 5.7 Trunk 5.7.1 SIP trunk can realize the connection between UC100-1T1S1O and IPPBX or SIP servers. Figure 5-57 Cofigure SIP Trunk Table 5-23 Explanation of Parameters for SIP Trunk...
  • Page 79 SIP trunk connecting UC100-1T1S1O and the server, and then enable register for the SIP trunk. If the FXS f UC100-1T1S1O intends to register to a server, you need to configure a SIP trunk connecting UC100-1T1S1O and the server, then enable register for the port and designate the SIP trunk to it.

  • Page 80: Fxo

    PSTN. Different from the FXO ports of other gateways, the FXO port of UC100-1T1S1O only allows one-time dialing, which means called numbers needs to be dialed directly for calls that go out from the FXO port.
  • Page 81 Table 5-24 Explanation of Parameters for FXO Trunk Extension The extension account of the FXO port, which is used to register Autodial Number The autodial number of the FXO port when there are incoming calls UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 82 The FXS profile that is selected for this FXS extension If it is on, this FXO trunk can be used, otherwise, the FXO trunk Status is unavailable. FXO Automatch Impedance： Click the Detection button, and the UC100-1T1S1O gateway will automatically detect the most-matched impedance. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 83: Gsm

    The GSM trunk interconnects the UC100-1T1S1O device and the GSM network. The GSM function of the UC100-1T1S1O gateway can transmit voice or SMS from IP network to mobile network, and can convert voice or SMS from mobile network/fixed network into IP packages and then transmit those packages to IP network through Erthernet port.
  • Page 84 Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Figure 5-60 Configure GSM Trunk UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 85 The username of this GSM trunk; it is generally a phone number The username of this GSM trunk, which is used during register Auth Username authentication The password of this GSM trunk, which is used during register Password authentication UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 86 Input Gain The receiving gain of the GSM port Output Gain The sending gain of the GSM port If it is on, this GSM trunk can be used, otherwise, the FXO Status trunk is unavailable UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 87: Call Control

    Use the Home tab to apply 标题 1 to the text that you want to appear here. 5.8 Call Control This section is to configure routes or route groups for incoming and outgoing calls through UC100-1T1S1O, as well as IVR, SMS, USSD and so on. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 88: Setting

    Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 5.8.1 Setting Figure 5-61 Basic Setting of Call Control UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 89: Route Group

    Fax Mode T38 or T30（Pass-through） Tone Detection by Local If it is enabled, UC100-1T1S1O will detect fax tones automatically during a call and the call will be switched into fax mode after a fax tone is detected. SDP Param ‘a=X-fax’...

  • Page 90: Route

    The strategies for choosing which route under the route group as the destination route, including Sequence (Ascending), Sequence (Cyclic Ascending), Simultaneous and Random 5.8.3 Route On the Call Control  Route interface, you can configure routes for incoming calls and outgoing calls. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 91 The profile of the caller number and the called number; please make reference to the Profile  Number section.The default value is ‘Off’ Note: it cannot be simultaneously used with the following parameters of ‘caller number prefix’ and ‘called number prefix’ UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 92: Feature Code

    The processing when a call through this route fails 5.8.4 Feature Code UC100-1T1S1O provides convenient telephone functions. Connect a telephone to the FXS port and dial a specific feature code, and you can query conrresponding information. The following is the corresponding function of each feature code: UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 93: Ivr

    Note: All feature codes are enabled by default. 5.8.5 On the Call Control  IVR interface, you can carry out specific configurations for the IVR which has been uploaded from the System  Voice interface. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 94 IVR will choose the destination of ‘timeout’. When the destination is a trunk, user does not need to pre-configure the called number, and the system will prompt the user to dial the called number. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

  • Page 95: Sms Route

    5.8.6 SMS Route UC100-1T1S1O allows SMS to be sent between SIP clients, and meanwhile allow SMS to be sent between IP network/GSM network and GSM network. On the Call Control SMS Route interface, you can establish route for these SMS.

  • Page 96: Sms

    Receive List to read SMS contents. Reply Message Click , and then enter SMS contents in the box on the left. Click Send in the last. Delete Message Click to delete an SMS. UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 97 Service provider feedbacks a service menu to user according to this USSD code. Encode Supports auto, 7-bit and UCS2; 7-bit is used to send original ASCII, while UCS2 is used to send any languages USSD Message The Content of the USSD message UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 98 3. In order to locate faluts more quickly, you sometimes need to enter into the System Service Log interface, click export, and then send this exported file and the tracing file to technical support, Figure 5-69 Call Tracing for Diagnostics UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 99 HTTP Hypertext Transfer Protocol Local Area Network L2TP Layer 2 Tunneling Protocol PPTP Point-to-Point Tunneling Protocol MAC Address Media Access Control Adress Network Address Translation Ping Packet Internet Grope Session Initiation Protocol Transmission Control Protocol UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...
  • Page 100 Point-to-point Protocol over Ethernet Quality of Service UPnP Universial Plug and Play VLAN Virtual Local Area Network Network Time Protocol STUN Simple Traversal of UDP over NAT PSTN Public Switched Telephone Network WLAN Wireless Local Area Network UC100-1T1S1O User Manual Copyright©2011-2016 Dinstar...

Table of Contents