36 Installation
4
Installing the 8010co chassis in a 19-inch two-post rack
Install the 8010co chassis in a 19-inch two-post rack.
Prerequisites
•
Procedure steps
Step
1
2
3
Copyright © 2008 Nortel Networks
.
Insert and tighten the rack-mounting screws with a Phillips
screwdriver.
Verify that you have the following tools and materials:
—
12 Phillips-head screws
—
1 Phillips screwdriver
Action
Place the installation shelf at the bottom of the rack and inside
the rails.
Hold the installation shelf in position and align the shelf mounting
rail with the two holes on each side of the vertical rack support.
Insert a Phillips-head screw through each installation shelf
mounting hole and into the corresponding hole in the rack.
Nortel Ethernet Routing Switch 8600
NN46205-310 02.01 Standard
30 May 2008
--End--
Quick Start