38 Installation
Step
1
2
3
Installing the top cable-management bracket
Install the top cable-management bracket to the 8010co chassis.
Procedure steps
Step
1
2
3
Copyright © 2008 Nortel Networks
.
Action
Loosen, but do not remove, the rack-mounting screws required
to install a cable guide.
Slide the cable guide onto the loosened screws.
Tighten the screws to secure the cable guide to the chassis.
Action
Align the mounting retainers on the inside of the top
cable-management bracket with the holes on the front of the
chassis.
Push the sides of the top cable-management bracket into place.
Insert and tighten the eight screws using a Phillips screwdriver to
secure the top cable-management bracket to the chassis.
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 02.01 Standard
30 May 2008
--End--
--End--