Vlan Port Configuration - Bay Networks BayStack 350 Using Manual

Using the BayStack 350 10/100/1000 Series Switch

VLAN Port Configuration

The VLAN Port Configuration screen
specified switch ports with the appropriate PVID/VLAN association that enables
the creation of broadcast domains (see "Shared Servers" on page 1-26 for more
information about setting up broadcast domains). You can configure specified
switch ports to filter (discard) all received tagged frames, untagged frames, or
unregistered frames (see "IEEE 802.1Q Tagging" on page 1-19). You can also
prioritize the order in which the switch forwards packets, on a per-port basis (see
"IEEE 802.1p Prioritizing" on page 1-39).
Figure 3-9
gigabit MDA installed in switch port 25. The gigabit MDA restricts the
configuration of VLAN tagging (see "Port Membership" field in
page
Choose VLAN Port Configuration (or press c) from the VLAN Configuration
Menu screen to open the VLAN Port Configuration screen.
Port:
Filter Tagged Frames:
Filter Untagged Frames:
Filter Unregistered Frames:
Port Name:
PVID:
Port Priority:
The following parameters specify egress rules for the Gigabit port only:
Primary VLAN Tagging (with VLAN equal to PVID):
Secondary VLAN Tagging (with VLAN not equal to PVID):
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-10. VLAN Port Configuration Screen
3-24
shows an example of the VLAN Port Configuration screen with a
3-23).
VLAN Port Configuration
(Figure 3-10) allows you to configure
[ 25 ]
[ No ]
[ No ]
[ No ]
[ Port #25 ]
[ 1 ]
[ 0 ]
[ Untagged ]
[ Tagged
Press Ctrl-C to return to Main Menu.
Table 3-8, on
]
304376-B Rev 00