Vlan Workgroup Summary - Bay Networks BayStack 350 Using Manual

Port:
Filter Tagged Frames:
Filter Untagged Frames:
Filter Unregistered Frames:
Port Name:
PVID:
Port Priority:
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 1-22. VLAN Port Configuration Screen Example

VLAN Workgroup Summary

This section summarizes the VLAN workgroup examples discussed in the
previous sections of this chapter.
As shown in
with multiple VLANs:
•
•
•
Because S4 (a non-802.1Q switch) does not support 802.1Q tagging, a single
switch port on each switch must be utilized for each VLAN (see
Spanning Multiple Untagged
304376-B Rev 00
VLAN Port Configuration
Figure 1-23, switch S1 (a BayStack 350-12T switch) is configured
Ports 1, 6, 11, and 12 are in VLAN 1.
Ports 2, 3, 4, 7, and 10 are in VLAN 2.
Port 8 is in VLAN 3.
BayStack 350 10/100/1000 Series Switches
[ 8 ]
[ No ]
[ No ]
[ No ]
[ Library Sharing ]
[ 3 ]
[ 0 ]
Press Ctrl-C to return to Main Menu.
Switches" on page 1-24).
"VLANS
1-31