Multilink Trunk Utilization Screen - Bay Networks BayStack 350 Using Manual

MultiLink Trunk Utilization Screen

The MultiLink Trunk Utilization screen
to monitor the percentage of bandwidth used by configured trunk members. You
can choose the type of traffic to monitor.
Figure 3-18
ports configured in
the configured trunks (up to six), the screen prompts users to Press [Ctrl]-N to
view trunks five and six.
Choose MultiLink Trunk Utilization (or press u) from the MultiLink Trunk
Configuration Menu screen to open the MultiLink Trunk Utilization screen.
Trunk Traffic Type
----- -------------
1 [ Rx and Tx ]
2 [ Rx and Tx ]
3 [ Rx and Tx ]
4 [ Rx and Tx ]
Press Ctrl-N to display utilization for trunks 5-6.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-18. MultiLink Trunk Utilization Screen (1 of 2)
304376-B Rev 00
shows an example of bandwidth utilization rates for the trunk member
Figure 3-17. Because two screens are required to show all of
MultiLink Trunk Utilization
Port Last 5 Minutes
---- --------------
6 90.0%
7 20.0%
9 35.0%
17 85.0%
25 45.0%
26 25.0%
13 35.0%
14 30.0%
19 40.0%
20 25.0%
Using the Console Interface
(Figure 3-18 and
Last 30 Minutes
---------------
70.0%
55.0%
45.0%
35.0%
45.0%
70.0%
35.0%
80.0%
35.0%
70.0%
Press Ctrl-C to return to Main Menu.
Figure 3-19) allows you
Last Hour
---------
90.0%
80.0%
45.0%
20.0%
50.0%
35.0%
50.0%
70.0%
75.0%
85.0%
More...
3-39