Reset; Figure 3-36. Self-Test Screen After Resetting The Switch - Bay Networks BayStack 350 Using Manual

Reset

The Reset option (accessed from the main menu) allows you to reset the BayStack
350 switch without erasing any configured switch parameters.
Resetting the switch takes approximately 5 seconds to complete. During this time,
the switch initiates a self-test that comprises various diagnostic routines and
subtests. The LEDs display various patterns to indicate that the subtests are in
progress.
The results of the self-test are displayed briefly (5 or 10 seconds) in the Self-Test
screen
(Figure
Note: The Self-Test screen remains displayed only if the self-test detects a
fatal error.
BayStack 350-24T Self-Test
CPU RAM test
ASIC addressing test
ASIC buffer RAM test
Port internal loopback test
Self-test complete.
Figure 3-36. Self-Test Screen After Resetting the Switch
304376-B Rev 00
(Figure 3-36), which is followed by the Bay Networks logo screen
3-37).
... Pass
... Pass
... Pass
... Pass
Using the Console Interface
3-77