Bay Networks BayStack 350 Using Manual page 150

Using the BayStack 350 10/100/1000 Series Switch
Table 3-15. MultiLink Trunk Configuration Screen Fields (continued)
Field Description
STP Learning The STP Learning column contains a single field for each row that, when enabled, allows
the specified trunk to participate in the spanning tree. This setting overrides those of the
individual trunk members.
Fast is the same as Normal, except that the state transition timer is shortened to two
seconds.
Default Value:
Range:
Trunk Mode The Trunk Mode column contains a single read-only field for each row that indicates the
default operating mode for the switch.
Basic: Basic mode is the default mode for the switch. When in this mode, source MAC
addresses are dynamically assigned to specific trunk members for flooding and
forwarding. This allows the switch to stabilize and distribute the data streams of source
addresses across the trunk members.
Default Value:
Trunk Status The Trunk Status column contains a single field for each row that allows users to enable
or disable any of the trunks.
Default Value:
Range:
Trunk Name The Trunk Name column contains a single optional field in each row that can be used to
assign names to the corresponding configured trunks. The names chosen for this
example can provide meaningful information to the user (for example, S1:T1 to FS2
indicates trunk 1, in switch S1 connects to file server 2)
3-38
Normal
Normal, Fast, Disabled
Basic
Enabled
Enabled, Disabled
304376-B Rev 00