Product At A Glance; Safety Notes - Chauvet Intimidator Spot 355 IRC User Manual

Product at a
Glance

Safety Notes

Intimidator Spot 355 IRC User Manual Rev. 1
Use on Dimmer
Outdoor Use
Sound-Activated
DMX
Master/Slave
These notes include important information about the mounting, usage, and maintenance
of this product; read before using the product.
·
Always connect the product to a grounded circuit to avoid the risk of electrocution.
·
Always disconnect the product from power before cleaning or replacing the fuse.
·
Avoid direct eye exposure to the light source while the product is on.
·
Make sure the power cord is not crimped or damaged.
·
Never disconnect the product from power by pulling or tugging on the cord.
·
If mounting the product overhead, always secure to a fastening device using a
safety cable.
·
Make sure there are no flammable materials close to the product when operating.
·
Do not touch the product's housing when operating because it may be very hot.
·
Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
·
The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
·
Always install the product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
·
Be sure that no ventilation slots on the product's housing are blocked.
·
Never connect the product to a dimmer or rheostat.
·
Make sure to replace the fuse with another of the same type and rating.
·
Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket.
·
The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the
product at higher temperatures.
·
In the event of a serious operating problem, stop using the product immediately.
·
Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
·
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Keep this User Manual for future use. If you sell the product, give this document to the
next owner.
x
Auto Programs
x
Auto-ranging Power Supply
P
Replaceable Fuse
P
User-Serviceable
P
P
P
P
x
Page 5 of 25