4. O
PERATION
This product is not designed for continual use. Make sure there are regular breaks during operation to maximize the
life of your laser. Always disconnect the Scorpion™ Script from power when not in use.
Manual Mode
Scorpion™ Script User Manual Rev. 2
Access the four different operating modes available in this product by using the <MODE>
button on the front panel. Pressing and holding the <MODE> button for 2.5 seconds will
turn the product on or off. Press <MODE> to cycle through the modes. Please see a
description of each mode below.
Press and hold <MODE> to turn off the Scorpion™ Script. Press <MODE> again to turn it
back on.
Mode
Description
Auto
Built-in auto programs
Sound
Sound-active mode
Text
Text mode
Time
Time mode
·
The LED indicator on the front of the product will illuminate in red when an
auto program is selected.
·
The LED indicator on the front of the product will illuminate in blue when the
Sound-Active mode is selected, and will blink to the beat of detected sounds.
·
The LED indicator on the front of the product will illuminate in red and blue
when text mode is selected.
·
The LED indicator on the front of the product will blink red and blue when time
mode is selected.
Page 15 of 64