Sntp Server Secondary Address Command; No Sntp Server Command; Nortel Ethernet Routing Switch 2500 Series; Nn47215-500 (323162-B) 02.02 Standard - Nortel 2500 Series System Configuration Manual

210 System configuration using the CLI
Table 69 "sntp server primary address command parameters and variables"
(page 210)
primary address command.
Table 69
sntp server primary address command parameters and variables
Parameters and
variables
<A.B.C.D>
The default is 0.0.0.0.

sntp server secondary address command

The sntp server secondary address command specifies the IP
addresses of the secondary NTP server. The syntax for the sntp server
secondary address command is:
sntp server secondary address <A.B.C.D>
The sntp server secondary address command is executed in the
Global Configuration command mode.
Table 70 "sntp server secondary address command parameters and
variables" (page 210)
server secondary address command.
Table 70
sntp server secondary address command parameters and variables
Parameters and
variables
<A.B.C.D>
The default is 0.0.0.0.

no sntp server command

The no sntp server command clears the NTP server IP addresses. The
syntax for the no sntp server command is:
no sntp server <primary|secondary>
The no sntp server command is executed in the Global Configuration
command mode.
Table 71 "no sntp server command parameters and variables" (page
211)
command.
Copyright © 2007, Nortel Networks
.
describes the parameters and variables for the sntp server
Description
Enter the IP address of the primary NTP server.
describes the parameters and variables for the sntp
Description
Enter the IP address of the secondary NTP server.
describes the parameters and variables for the no sntp server

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007