Configuring Aur Using Device Manager; Nortel Ethernet Routing Switch 2500 Series; Nn47215-500 (323162-B) 02.02 Standard - Nortel 2500 Series System Configuration Manual

Configuring AUR using Device Manager
You also can enable or disable AUR using Device Manager by toggling the
AutoUnitReplacementEnabled field in the System tab (see
(page
Displaying unit stack uptime
You can display the uptime for each unit in a stack. Unit stack uptime
collects the stack uptime for each unit in a stack and reports this information
when requested. You can determine how long each unit is connected to the
stack. You can use the show stack-info uptime to display the unit
uptimes. The syntax for the show stack-info uptime is
show stack-info uptime
The show stack-info uptime is executed in Privileged EXEC
command mode and takes no parameters.
Copyright © 2007, Nortel Networks
.
259)).

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007
Auto Unit Replacement 63
"System tab"