322 Configuring the switch using web-based management
Section
Item
Address
In-Band
Subnet Mast
Gateway
Default
Setting
Gateway
2
3
Modifying system settings
You can create or modify the system name, system location, and network
manager contact information.
Copyright © 2007, Nortel Networks
.
Range
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
Type information in the text boxes, or select from a list.
Click Submit.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Description
ATTENTION
When the IP address is
entered in the In-Band
IP Address field, and the
In-Band Subnet Mask field
value is not present, the
software provides an in-use
default value for the In-Band
Subnet Mask field that is
based on the class of the
IP address entered in the
In-Band IP Address field.
Type a new subnet mask in the
appropriate format.
Network routers use the subnet
mask to determine the network or
subnet address portion of a host's
IP address. The bits in the IP
address that contain the network
address (including the subnet)
are set to 1 in the address mask,
and the bits that contain the host
identifier are set to 0.
Type an IP address for the default
gateway in the appropriate
format.
—End—