Viewing And Editing Multiple Port Configurations; Nortel Ethernet Routing Switch 2500 Series; Nn47215-500 (323162-B) 02.02 Standard - Nortel 2500 Series System Configuration Manual

Field
OperDuplex
AdminSpeed
OperSpeed
AutoNegotiationCapability
AutoNegotiation
Advertisments
MltId
IsPortShared
PortActiveComponent
•
•
Viewing and editing multiple port configurations
To view or edit the configurations of multiple ports:
Step
1
2
Copyright © 2007, Nortel Networks
.
Description
The current mode of the port (half duplex or full duplex).
Set the port's speed.
The current operating speed of the port.
Specifies the port speed and duplex capabilities that a switch can
support on a port, and that may be advertised by the port using
auto-negotiation.
Specifies the port speed and duplex abilities to be advertised during
link negotiation.
The MultiLink Trunk to which the port is assigned (if any).
Specifies whether a port is shared. Multiple ports that are logically
represented as a single port are shared. Only one shared port may
be active at a time.
Specifies the physical port components that are active for a shared
port.
"Viewing and editing multiple port configurations" (page 307)
"Interface tab for multiple ports" (page 308)
Action
Select the ports you want to edit.
Press Ctrl+left click the ports you want to view or configure. A
yellow outline appears around the selected ports.
Do one of the following:
• From the shortcut menu, choose Edit.
•
From the Device Manager main menu, choose Edit > Port.
• From the shortcut menu, choose Edit.
• From the toolbar, click Edit.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007
Viewing and editing multiple port configurations 307