Maintenance; Recovery And Recycling - kruss MBL2000 Series Operating Manual

Binocular microscope
Table of Contents

Advertisement

Available languages

Available languages

10. Maintenance

Adjust the position for a sharp image on the
S
camera ort he video monitor. This position is fixed
by fastening the locking screw on the adapter.
In case of the photo adapter MML2042, it may be
necessary to also loosen the stud screw (X) and to
change the distance in the lower adapter area to
achieve a perfect sharpness.
After these adjustments, the microscope with the photo
or video device is ready for use.
S
X
10. Maintenance
Just like all precision instruments, your microscope should be handled with care.
Protect your microscope from dust, condensation, vibration and direct exposure to
sunlight.
Keep the optical system very clean. Remove dust with a soft brush or clean air.
Remove finger prints with a lint-free cloth soaked in an ether/alcohol mixture (80% ether
and 20% alcohol). Special cleaning paper can be purchased in a photo store.
Do not use any corrosive solutions for the microscope!
After usage, place the microscope back into the box and protect it with a protective dust
cover.
Important note!
Aggressive substances may damage the finish of the
plastic casing!
Important note!
In case of a malfunction, the microscope should be
repaired by A. KRÜSS Optronic or an authorized
repair shop.
52

Recovery and Recycling

The device can be an important source of raw materials. Please do not dispose of as
waste, but collect separateley for the recycling and recovery of the contained materials.
If disposed improperly, the materials may be damaging to the environment and human
health.
The manufacturer of the device, A.KRÜSS Optronic GmbH, collects, uses and recycles
the contained raw materials. However this recovery requires your support.
If you decide to dispose of this microscope, please do not try to open it up or to use
parts of it in any other way than described in this manual, but return the device to the
dealer you purchased it from.
The dealer should take the device back free of cost.
The recovery of the raw materials is effected with respect to the European guideline
2002/96/EC and any other applicable guideline.
Recovery and Recycling
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents