Warranty Conditions - kruss MBL2000 Series Operating Manual

Warranty conditions

Warranty conditions
A.KRÜSS Optronic guarantees the materials and workmanship of KRÜSS microscopes
for a period of 24 months from the date of shipping. A. KRÜSS Optronic will repair
or replace defective devices within this period, given that they fall under terms of the
guarantee. The device must be sent back to A. KRÜSS Optronic for warranty repairs or
service. Shipping from the customer is at the expense of A. KRÜSS Optronic for warranty
repairs, in any other case at the customer's expense.
A.KRÜSS Optronic guarantees that the hardware specified by A. KRÜSS Optronic for
use with this device will function without error if used according to our manufacturer
guidelines.
A.KRÜSS Optronic does not guarantee error-free and uninterrupted operation of the
device or the accuracy of this instruction manual. A.KRÜSS Optronic is not liable for
consequential damage.
Warranty limitations:
This warranty does not cover errors and damage arising due to improper handling,
through modification, misuse, operation above and beyond the specified environmental
conditions or through unauthorised maintenance.
Further claims will not be accepted or recognised. A. KRÜSS Optronic expressly provides
no guarantee of the workability or economic use in specific application cases.
A.KRÜSS Optronic reserves the right to make changes to this instruction manual and
the technical data of the device in question at any point in time.
This digital refractometer may only be transported when properly packed in the
complete original packaging including the moulded plastic protectors.
Request replacement packaging from your supplier if necessary.
A.KRÜSS Optronic GmbH
Alsterdorfer Straße 276–278
22297 Hamburg | Germany
Tel +49-(0)40-51 43 1 7-0
Fax +49-(0)40-51 43 1 7-60
E-Mail info@kruess.com
Web www.kruess.com
54