Maintenance; Reclamation And Recycling - kruss MSL4000 Series Operating Manual

Maintenance

Just like all precision instruments, your microscope should be handled with care.
Protect your microscope from dust, condensation, vibration and direct exposure to
sunlight.
Keep the optical system very clean. Remove dust with a soft brush or clean air.
Remove finger prints with a lint-free cloth soaked in an ether/alcohol mixture (80% ether
and 20% alcohol). Special cleaning paper can be purchased in a photo store.
Do not use any corrosive solutions for the microscope!
After usage, place the microscope back into the box and protect it with a protective
dust cover.

Reclamation and recycling

The device could be an important source of raw material. Please do not dispose as
garbage but collect it separately for recycling and reclamation of the contained
materials. In case of improper disposal, the materials might be harmful for the
environment and health.
The manufacturer of the microscope, A. KRÜSS Optronic GmbH collects, uses and
recycles the contained raw materials. However, the reclamation requires your support.
Should you decide to dispose this microscope, do not attempt to open it or to use parts
of it for other purposes than described in this instruction manual. Take the device to the
dealer from which you have bought it. The dealer should accept the microscope free of
charge.
The reclamation of the raw materials takes place in compliance with the European
Directive 2002/96/EC and all other applicable requirements.
Maintenance | Reclamation and recycling
Important note!
Aggressive substances may damage the finish or the
plastic casing!
Important note!
In case of a malfunction, the microscope should be
repaired by A. KRÜSS Optronic or an authorized
repair shop
39