Removing The Contivity 2600 Top Cover - Nortel 2500 Installation Hardware

The first few times you remove the front bezel it will be rather difficult to remove.
This is because the ball studs and socket clips are new. After a few times, removal
is easier.
To remove the front bezel, you need a Phillips screwdriver.
1
Turn each of the two screws on the front bezel a quarter turn
counter-clockwise.
2
Grip the two handles and pull the bezel towards you firmly to unsnap it from
the chassis.

Removing the Contivity 2600 top cover

To remove the cover to install LAN, WAN, or hardware accelerator cards or to
install additional memory, you must remove the switch's front bezel and then you
must remove the switch's top cover.
cover from the switch.
Chapter 4 Contivity 2600 Option Installation 59
Figure 25
Installing Hardware Options for the Contivity VPN Switch
shows you how to remove the top