Figure 22 Removing A Contivity 4000 Hard Disk Drive - Nortel 2500 Installation Hardware

Figure 22 Removing a Contivity 4000 hard disk drive

In sert an d tu rn ke y, th en
re m ove ha rd disk by h an dle.
2
Pull the handle to remove the hard disk drive.
3 Insert the replacement hard drive fully, and lock it by turning the key
clockwise. Make sure the hard disk drive LED shows the proper drive
number.
4 Replace the front bezel.
5
Reload the software on the disk. Refer to "Using the Recovery Diskette" in
Installing the Contivity 4600 for more information on using the recovery
diskette.
Chapter 3 Contivity 2500/2000/4000 Option Installation 53
Installing Hardware Options for the Contivity VPN Switch
D rive 0
D rive 1