Contivity 2600 System Board Layout; Figure 25 Removing The Contivity 2600 Top Cover - Nortel 2500 Installation Hardware

60 Chapter 4 Contivity 2600 Option Installation

Figure 25 Removing the Contivity 2600 top cover

➨
Slide the top cover forward approximately 1/4 inch, then lift the lid 2 to 3
inches and move it away from the chassis.

Contivity 2600 system board layout

Figure 26
option card slots, and the CPU cooling fan.
302283-E Rev 00
Remove these four screws
Slide cover forward and lift up
shows the Contivity 2600's system board, in particular the DIMMs,
Boot/Ready
Boot/Ready
CS260006A