Figure 7 Removing A Contivity 4600 Hard Disk Drive - Nortel 2500 Installation Hardware

28 Chapter 1 Contivity 4600 Option Installation

Figure 7 Removing a Contivity 4600 hard disk drive

Insert and turn key, then
remove hard disk by handle.
3 Insert the replacement hard drive fully, and lock it by turning the key
clockwise. Make sure the hard disk drive LED shows the proper drive
number.
4 Replace the front bezel.
If you need to reload the software on the disk, see the information on using the
recovery diskette in the Installing the Contivity 4600 book.
302283-E Rev 00
Drive 0
Drive 1
CS460011A