4
Remove the top cover, as shown in
5
Remove the filler panel screw and pull out the filler panel, as shown in
Figure
34.
Figure 34 Installing Contivity 1600 LAN/WAN option cards
Screwdriver
Phillips
slots
screw
6
Slide the option card into the intended slot, as shown in
Make sure the card seats firmly and evenly into the card slot. If the card is not
seated properly, it will not work.
Chapter 5 Contivity 1600 Option Installation 73
Figure
Installing Hardware Options for the Contivity VPN Switch
31.
Option card
slot
Option card
Motherboard
Figure
CS160020A
35.