Replacing A Contivity 4500 Power Supply; Figure 13 Removing A Contivity 4500 Power Supply - Nortel 2500 Installation Hardware

40 Chapter 2 Contivity 4500 Option Installation

Replacing a Contivity 4500 power supply

Figure 13
Contivity 4500.

Figure 13 Removing a Contivity 4500 power supply

To remove the power supply:
1 Remove the front bezel as shown in
2
Use a flat-head screwdriver to unscrew the top and bottom power supply
screws.
3 Grab the handle and pull the power supply firmly, until the device disengages.
Avoid the sharp sheet-metal edges.
302283-E Rev 00
shows you how to replace a hot-swappable power supply for the
Figure 8.
CS460010A