Table of Contents
Advertisement
Using the Passport 8100 Modules
To replace a module:
Disconnect all network cables from the module to be removed.
1.
Loosen the module retaining screws.
2.
Rotate the inserter/extractor levers to disconnect the module from the
3.
backplane connectors.
Remove the module from the chassis.
4.
Insert the new module in the chassis and tighten the retaining screws.
5.
Reconfigure the ports of the new module as necessary.
6.
Reconnect the cables.
7.
2-8
204515-C
Advertisement
Table of Contents
