Table of Contents
Advertisement
Using the Passport 8100 Modules
Text Conventions
This guide uses the following text conventions:
angle brackets (< >)
braces ({})
brackets ([ ])
italic text
screen text
xvi
Indicate that you choose the text to enter based on the
description inside the brackets. Do not type the brackets
when entering the command.
Example: If the command syntax is:
ping <ip_address>
ping 192.32.10.12
Indicate required elements in syntax descriptions where
there is more than one option. You must choose only one
of the options. Do not type the braces when entering the
command.
Example: If the command syntax is:
show ip {alerts | routes}
or
show ip alerts
Indicate optional elements in syntax descriptions. Do not
type the brackets when entering the command.
Example: If the command syntax is:
show ip interfaces [-alerts]
show ip interfaces
Indicates file and directory names, new terms, book titles,
and variables in command syntax descriptions. Where a
variable is two or more words, the words are connected
by an underscore.
Example: If the command syntax is:
show at <valid_route>
is one variable and you substitute one value for it
Indicates command names and options, text that you need
to enter, and system output such as prompts and system
messages.
Example:
Set Trap Monitor Filters
, you enter:
, you must enter either:
, but not both.
show ip routes
, you can enter either:
or
show ip interfaces -alerts.
then
valid_route
.
204515-C
Advertisement
Table of Contents
