Installing A Module; Figure 2-2. Inserter/Extractor Levers In Extended Position - Nortel 1000BASE-XD Using Manual

Installing a Module

To install a module in a Passport 8000 Series chassis:
Remove the filler panel from the slot where you will install the module
1.
(Figure
Figure 2-1.
Make sure the inserter/extractor levers are extended away from the front
2.
of the module
Figure 2-2.
204515-C
2-1).
Removing a Filler Panel
(Figure 2-2).
Inserter/Extractor Levers in Extended Position
Installing a Passport 8100 Module
9058FA
9397FA
2-3