Table of Contents
Advertisement
Using the Passport 8100 Modules
•
A command line interface (CLI) for managing the Passport 8100 switch,
accessible through the Passport 8190SM module or through a Telnet
connection
If a Passport 8190SM module is not installed, the CLI is accessible through
the Comm port on the Passport 8132TX module.
•
Support for up to eight simultaneous Telnet sessions with optional password
protection
•
Device Manager support
•
Web-based monitoring support
•
SNMPv1 and SNMPv2 agent support
•
Upgradable device firmware in nonvolatile flash memory using the Trivial
File Transfer Protocol (TFTP)
•
Optional PCMCIA card for file management
•
Up to 2,000 VLANs defined by port or network protocol
Passport 8190SM Management Module
The Passport 8190SM Switch Management Module
centralized management capabilities for the Passport 8010 and 8006 chassis. Use
this module to configure and manage all 8100 Series modules in the chassis.
Management
1 = Ethernet Management Port
2 = DCE/DTE Switch
3 = Console/Modem Ports
4 = Reset Button
5 = PCMCIA Card Slot
6 = LEDs
Figure 1-1.
1-4
Console
Modem (DTE)
Link
DCE|DTE
100
1
2
3
Passport 8190SM Switch Management Module
(Figure
PCMCIA
Reset
4
5
1-1) provides
1
2
3
Utilization %
Power Supply
Master
CPU
25
50
75
100
1
2
Temp
Online
Fan
6
9673EA
204515-C
Advertisement
Table of Contents
