Table of Contents
Advertisement
Passport 8148TX 48-Port I/O Module
The Passport 8148TX module provides 48 autonegotiating 10/100 Mb/s ports
(Figure
circuitry automatically negotiates the highest possible data rate and the duplex
operation possible with the attached device, if the attached device supports IEEE
802.3u autonegotiation.
Figure 1-5.
The port connectors are modular RJ-45 connectors with MDI-X wiring. This port
can be connected to an MDI port (for example, a workstation or server) using a
straight-through cable.
The Passport 8108TX module uses 10BASE-T/100BASE-TX RJ-45 port
connectors to connect to 10 Mb/s or 100 Mb/s Ethernet segments or nodes.
Note: For 10 Mb/s connections, you can use Category 3, 4, or 5 copper
unshielded twisted pair (UTP) cable. Use only Category 5 UTP cable to
connect ports that will operate at 100 Mb/s.
Refer to
RJ-45 port connectors.
204515-C
1-5). Each port can operate in full- or half-duplex mode. Autonegotiation
Passport 8148TX Edge Switch Module
Appendix A, "Technical
About the Passport 8100 Modules
Specifications," for more information about the
9672EA
1-11
Advertisement
Table of Contents
