Table of Contents
Advertisement
Using the Passport 8100 Modules
Setting System Security
System security parameters allow you to define login names and passwords for
access to the switch management functions and to specify the access methods,
such as through a Telnet session or through a Web browser.
To set system security:
Change CLI users and passwords using the following commands:
1.
•
•
•
•
where:
username
password
Change SNMP community strings using the command:
2.
config sys set snmp community <ro|rw|l2|rwa> <commstr>
where:
<ro|rw|l2|rwa>
Read-Write,
<commstr>
Enable or disable Web access using the commands:
3.
•
•
3-6
config cli password ro <username>[<password>]
Read-Only login and/or password.
config cli password l2 <username>[<password>]
Layer 2 Read-Write login and/or password.
config cli password rw <username>[<password>]
Read-Write login and/or password.
config cli password rwa <username>[<password>]
Read-Write-All login and/or password.
is the login name.
is the password associated with the login name.
is the choice of community—
is Layer 2 Read-Write, and
l2
is the input community string {string}.
config web-server disable
config web-server enable
is Read-Only,
ro
is Read-Write-All.
rwa
to turn off Web access
to turn on Web access
—changes the
—changes the
—changes the
—changes the
is
rw
204515-C
Advertisement
Table of Contents
