Table of Contents
Advertisement
separator ( > )
vertical line (
Related Publications
For more information about using the Passport management software or other
Passport 8000 series equipment, refer to the following publications:
•
Getting Started with the Passport 8100 Management Software
(part number 207311-C)
Provides instructions to install management software and describes general
use of the management software.
•
Reference for the Passport 8000 Series Management Software Switching
Operations (part number 207414-C)
Describes how to use Device Manager software to configure and manage
layer 2 (switching) functions, including procedures and illustrations of the
software user interface.
•
Reference for the Passport 8000 Series Command Line Interface Switching
Operations (part number 207308-C)
Describes the command line interface (CLI) commands and parameters. Most
configuration tasks that can be performed using the management software can
also be done using the command line interface.
•
Networking Concepts for the Passport 8000 Series Switch
(part number 207307-C)
Provides general information and description of how a Passport routing
switch handles various networking features, such as VLANs and Multi-Link
Trunking.
204515-C
Shows menu paths.
Example: Protocols > IP identifies the IP option on the
Protocols menu.
|
)
Separates choices for command keywords and
arguments. Enter only one of the choices. Do not type the
vertical line when entering the command.
Example: If the command syntax is:
show ip {alerts | routes}
show ip alerts
, you enter either:
or
, but not both.
show ip routes
Preface
xvii
Advertisement
Table of Contents
