Table of Contents
Advertisement
Comm Port Connector
The cable used to connect the comm port is a serial cable with a mini-DIN
connector on one end to connect to the Passport 8132TX comm port and a DB-25
connector on the other to connect to a terminal or computer. This cable and a
DB-25 to DB-9 adapter are shipped with the Passport 8000 Series chassis.
Note: The Comm port on the Passport 8132TX module is active only when
the chassis has no installed Passport 8190SM module. You should not use this
port for managing the switch if you are using software version 2.0 or later.
MDAs
450-1SR MDA, 450-1SX MDA
Required Cable:
Maximum distance:
Wavelength:
Average Transmit Output Power:
Average Receiver Sensitivity:
450-1LR MDA, 450-1LX MDA
Required Cable:
Maximum distance:
Wavelength:
Average Transmit Output Power:
Average Receiver Sensitivity:
204515-C
Multimode fiber optic
1804 ft (550 m)
850 nm
-9.5 to -4 dBm
-17 dBm (minimum)
Multimode fiber optic
1804 ft (550 m)
1300 nm
-5.2 to 0 dBm
-22 dBm (minimum)
Technical Specifications
A-7
Advertisement
Table of Contents
