Operation - Stadler Form CHEF ONE Operating Instructions Manual

5. Timer
• Setting the cooking end time. See the "Setting the Timer" section.
6. Hours
• Setting time in hours.
• Current time indication.*
7. Minutes
• Setting time in minutes.
• Current time indication.*
8. Time
• Setting cooking time for manual programs. See the "Use" section.
9.
• To open or close the lid lightly press this icon at the edge of the lid.
* To display the current time during cooking press the Hours or Minutes
buttons.
display indication
10. Indication of the cooking process
• The display shows the current cooking process.
11. Cooking level
• If in the "Rice" program you have selected one of the three pre-set cook-
ing levels the display shows the "Cooking level" icon and one of the icons:
Soft, Standard or Hard depending on your selection.
12. Start delay – The display shows the time by which the dish will be
cooked.
13. Clock – The display shows the current time.
14. preparation time – Is shown on the display during setup of cooking
time.
15. Heating – lit when the heating program is activated.
16. Time remaining – displays the time left till the program is completed.
17. Cooking programs – the selected program is indicated on the display
during the cooking process.
Inner pot
On the inside of the inner pot there is a graduated scale:
• The CUP scale is used to determine the appropriate water volume de-
pending on the amount of cereal.
• For example, if you are cooking 5 cups of rice you need to pour water up
to the 5 mark.
• On the L scale the volume of liquid in litres is shown.
nOTE
Make sure that the amount of liquid does not exceed the maximum level,
otherwise during boiling the liquid can splash out through the steam valve.

OpERATIOn

Before first use
• Carefully remove all advertisement stickers and labels.
• Wash all removable parts of the multi-cooker and accessories in warm
water with neutral detergent, then wipe dry.
ATTEnTIOn!
The inner surface of the inner pot has a non-stick coating. Do not clean it
with abrasive detergents.
• Wipe the outer surfaces of the multi-cooker with a clean moist cloth.
• Place the multi-cooker on a level horizontal surface. When choosing a
place, make sure that the hot steam does not come into contact with
furniture, appliances, walls etc.
Setting the time
To set the current time, plug the multi-cooker into an electric outlet. Press
and hold the "Hours" button on the control panel, when the numbers on
the display start flashing, quickly press the "Hours" button and then the
"Minutes" button. After setting the current time press the "Start" button.
Use
• Before cooking take out the inner pot from the multi-cooker and make
sure that there are no food fragments or foreign objects in the inner pot
compartment or on the heating element.
• Place the ingredients into the inner pot, add the appropriate amount of
water or other liquid according to the recipe.
• Insert the inner pot into the multi-cooker. Before inserting the inner pot
into the multi-cooker, make sure that the outer surface of the inner pot is
dry. Do not let the ingredients fall onto the heating element, as this could
cause the multi-cooker to break down.
• Turn the inner pot slightly left and right to make sure that the inner pot fits
tightly against the heating element plate.
• Close the lid. Lightly press the edge of the lid marked with
sure that the lid is held in place tightly.
• Connect the multi-cooker to an electric outlet – the display lighting will
be turned on and the indicator on the "Start" button will start flashing,
this means that the multi-cooker is in standby mode. The display lighting
will be turned off automatically after 5 minutes if no button is pressed.
• Do not connect the multi-cooker to an electric outlet before all prepara-
tions are finished.
Select the program
• Select the cooking program by pressing "Program choice" until the de-
sired program is lit on the display. The programs are selected in order
(Rice  Express rice  Pilaf  Risotto  Milk porridge  Potato 
Soup  Stew  Steam cooker  Frying  Baking  Self-cleaning).
• To exit the program selection menu press and hold the "Heating/Cancel"
button for 3 seconds.
. Make