Hearing Aid Compatibility; Repairs; Important Safety Instructions - Nortel R2MFC Installation And Configuration Manual

Media bay module
Table of Contents

Advertisement

4

Hearing Aid Compatibility

System telephones are hearing-aid compatible, as defined in Section 68.316 of Part 68 FCC Rules.

Repairs

In the event of equipment malfunction, all repairs to certified equipment will be performed by an
authorized supplier.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.

Important Safety Instructions

The following safety instructions cover the installation and use of the Product. Read carefully and
retain for future reference.
Installation
Warning: To avoid electrical shock hazard to personnel or equipment damage observe
the following precautions when installing telephone equipment:
Use
When using your telephone equipment, basic safety precautions should always be followed to
reduce risk of fire, electric shock and injury to persons, including the following:
1
Read and understand all instructions.
2
Follow the instructions marked on the product.
3
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
4
Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool.
NN40010-300
NN40010-300
1
Never install telephone wiring during a lightning storm.
2
Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
3
Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
4
Use caution when installing or modifying telephone lines. The exclamation
point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the
literature accompanying the product. This symbol on the product is used to
identify the following important information: Use only with a CSA or UL
certified CLASS 2 power supply, as specified in the user guide.

Advertisement

Table of Contents
loading

Table of Contents