Nortel NN44200-300 Hardware Installation page 45

To set the modem DIP switches
Use a pair of tweezers or a small screwdriver to set the DIP switches as
described in the Change to column of the following table:
DIP Default
switch setting
1
OFF
2
OFF
3 ON
Copyright © 2007, Nortel Networks
.
Note: ON is down. OFF is up.
Change
to Function
OFF Data Terminal Ready (DTR) override
•
•
OFF Verbal/numeric result codes
•
•
ON Result code display
•
•
Nortel CallPilot
1002rp Server Hardware Installation
NN44200-300 01.01 Standard
5.0 23 February 2007
OFF: Normal DTR operations. (The computer
must provide a DTR signal for the modem to
accept commands. If DTR is dropped, the call is
terminated.)
ON: The modem ignores DTR (override).
OFF: Verbal (word) results.
ON: Numeric results.
OFF: Suppresses result codes.
ON: Enables result codes.
Preparing the modem 45
Nortel Networks Confidential