Nortel NN44200-300 Hardware Installation page 12

Nortel networks server hardware installation instructions
Table of Contents

Advertisement

12 Chapter 2 1002rp server description
Environmental specifications
Environmental condition
Operating temperature
Non-operating (storage) temperature
Non-operating humidity
Altitude
Electrostatic discharge
Acoustic noise
Operating shock
Handling drop
Front panel features (front view without the front bezel)
The front view of the 1002rp server chassis shows redundant dual fans to
the left and the right of the status panel. The left drive bay holds six SCSI
hard drives with hot-pluggable carriers. The media drive bay, located to the
right, houses the CD-ROM, tape drive, and floppy disk drive.
Copyright © 2007, Nortel Networks
.
Nortel CallPilot
1002rp Server Hardware Installation
NN44200-300 01.01 Standard
5.0 23 February 2007
Specification
10 C to 35 C (50 F to 95 F) Maximum
rate of change must not exceed 10 C
(50 F) per hour.
-40 C to 70 C (-40 F to 158 F)
95%, non-condensing at 30 C (86 F)
1829 m (6000 ft)
15 kV or more
50 dBA in a typical office ambient
temperature (18 C to 25 C [64.4 F to
77 F])
No errors with a half sine wave shock
of 2G (with 1 millisecond duration)
Operational after a free fall from 450
mm to 600 mm (18 in. to 24 in.)
(depending on weight)
Nortel Networks Confidential

Advertisement

Table of Contents
loading

This manual is also suitable for:

1002rp

Table of Contents