Nortel NN44200-300 Hardware Installation page 17

Slot definition and slot numbering
In these tables, the term slot refers to the available slot openings in the
chassis, not the PCI or ISA connectors inside the server.
Look at the server from the rear (see
slots are numbered from right to left, 1 to 20. Now, look at the server from
the front. The slots are numbered from left to right.
1002rp slot assignments
Slot
number
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Slot 7
Slot 8 b
Slot 9 (PCI Slot 1)
Slot 10 (PCI Slot 2)
Slot 11 (PCI Slot 3)
Slot 12 (PCI Slot 4)
a. On some CallPilot Manager screens, the CallPilot-assigned board label is displayed. This label
corresponds to the slot number. For example, BRD12 refers to the board in slot 12.
b. The SBC card includes two onboard NICs (for connection to the ELAN subnet, and the Nortel
server subnet) and an onboard video card. The NIC and monitor connectors are on the SBC
faceplate.
Copyright © 2007, Nortel Networks
.
Note: For Meridian 1 and Communication Server 1000, the first
MPB16-4 board must be installed in slot 11. You can install up to a
maximum of two MPB16-4 boards.
CallPilot-assigned
board label a
BRD01
BRD02
BRD03
BRD04
BRD05
BRD06
BRD07
BRD08
BRD09
BRD10
BRD11
BRD12
Nortel CallPilot
1002rp Server Hardware Installation
NN44200-300 01.01 Standard
5.0 23 February 2007
"Rear panel diagram" (page
Meridian 1*/
Communication
Server*
1000
Not used
Not used
Not used
Not used
Not used
Not used
Reserved for COM2
I/O bracket
Single board
computer
Reserved for COM1
and parallel port I/O
bracket
PCI RAID controller
MPB16-4 #1 or
MPB96 #1
MPB16-4 #2
(optional)
Slot assignments 17
13)). The
T1/SMDI
Not used
Not used
Not used
Not used
Not used
Not used
Reserved for COM2
I/O bracket
Single board
computer
Reserved for COM1
and parallel port I/O
bracket
PCI RAID controller
MPB96 board #1
D/480JCT-2T1
Nortel Networks Confidential