Nortel NN44200-300 Hardware Installation page 20

20 Chapter 2 1002rp server description
Switch connectivity
For more details about how the 1002rp server and switch connection
is established, refer to the Installation and Configuration Task List
(NN44200-306).
CallPilot ELAN subnet and Nortel server subnet setup
The 1002rp server provides 10/100Base-T Ethernet connectivity through
NICs installed in the server. See
on the location of NICs. The function of the NIC varies based on switch
connectivity, as described below:
Meridian 1 or Communication Server 1000 systems
•
•
Network requirements
Appropriate networking equipment must be available for both the Nortel
server subnet and ELAN subnet.
Copyright © 2007, Nortel Networks
.
One NIC provides connectivity to the ELAN subnet.
For information about the purpose and requirements of the ELAN, see
the Planning and Engineering Guide (NN44200-200).
A second NIC is optional.
This optional NIC is required only for Meridian 1 or Communication
Server 1000 systems that require a connection to the Nortel server
subnet (in addition to the ELAN subnet connection). The Nortel server
subnet provides data connectivity between desktop and Web messaging
clients, Web-enabled administrative PCs, and the CallPilot server.
Nortel CallPilot
1002rp Server Hardware Installation
NN44200-300 01.01 Standard
5.0 23 February 2007
"Slot assignments" (page 15) for details
Nortel Networks Confidential