Retrofitting Of Aluminium Stick; Speech Output Of The Telemetry Data - Multiplex SMART SX FLEXX Operating Instructions Manual

Transmitter
3.11
3.12
SMART SX FLEXX
The transfer of a firmware update is a menu-driven operation using the MPX-
Launcher software. This programme is available as freeware download on our
website: www.multiplexrc.de

Retrofitting of aluminium stick

As an optional accessory, the transmitter can be fitted with aluminium sticks, (see
section 10.2 "Scope of delivery and accessories" on page 84).
Procedure
1. The plastic sticks are merely slipped on. Pull off the plastic sticks gently,
simultaneous twisting simplifies the process.
2. Slip on the aluminium sticks.
3. Fix the aluminium sticks with the grub screw on the side.

Speech output of the telemetry data

Even as a user of the SMART SX FLEXX, you need not forgo the benefits of
telemetry. The prerequisite for it is the use of a telemetry-enabled M-LINK 2.4 GHz
receiver and, if desired, MSB sensors at the model end. For speech output of the
telemetry values, use the special telemetry receiver 'Souffleur' (# 4 5185). It
receives the telemetry data from the model completely independently of the
transmitter and converts the values into speech as well as into warnings in real
time. For detailed information, please refer to the operating instructions for the
device.
Page 61