Firmware Update / Settings For Future Rr+ Models; Installing Aluminium Sticks; Speech Output Of Telemetry Data; Advice And Service - Multiplex SMART SX Operating Instructions Manual

_________________________________________________________________________________________________________
functions can be used just as conveniently. Once
again, please refer to the instructions supplied with
the systems mentioned above for more information.
Trainer mode operations in conjunction with a MUL-
TIPLEX Cockpit SX transmitter.
Trainer mode operations in conjunction with a MUL-
TIPLEX PROFI TX transmitter, with Trainer module.
7.18 Firmware Update / settings for future RR+
models
New firmware updates can be loaded into the memory
of the SMART SX transmitter. This enables you at any
time to bring the transmitter up to the latest technical
standard. The settings for future RR+ models can also
be loaded into the transmitter. You will need a USB
adapter with Uni connec-
tor (see Chapter 5, Ac-
cessories) to connect the
SMART SX transmitter to
a PC (see Chapter 5).
The settings for future RR+ models or a firmware
update is carried out under menu control with the help
of the MPX-Launcher PC program. This software is
available on our website (www.multiplexrc.de) as a
free download. Take a look at the site, as you may
already find that a new firmware update is available
for the SMART SX transmitter.

7.19 Installing aluminium sticks

A set of optional aluminium stick tops can be fitted to
the transmitter. These upgrade items are available in
the following colours: black (# 7 3305) and orange (#7
SMART SX
Wireless Trainer
data transmissi-
on
Wireless Trainer
data transmissi-
on
Page 26
3306). The following figure shows the transmitter with black
aluminium sticks.
This is the procedure for fitting the new stick tops: the plas-
tic stick top is a simple push-fit, and can easily be with-
drawn; simultaneously twisting it eases the process. The
aluminium stick top can now be slid into place, and retained
by tightening the grubscrew on the side.

7.20 Speech output of telemetry data

You can still exploit the ad-
vantages of telemetry even if
you use a SMART SX sys-
tem. The basic requirement
for this is the use of a teleme-
try-capable M-LINK 2.4 GHz
receiver in the model, and - if
desired - the corresponding
MSB sensors. If you want the
telemetry values to be gener-
ated as speech output, you
need to use the special 'Souf-
fleur' telemetry receiver (# 4
5185): this unit picks up the
telemetry data from
model, completely independently of the transmitter, and
generates the values in spoken form in real time, as well as
vario tones and warning indicators. Please refer to the op-
erating instructions supplied with the device for all further
details.
8. A S
DVICE AND
We have taken great trouble to formulate these operating
instructions in such a way that you can quickly and easily
find answers to any questions which might arise. However,
if you still have a query regarding your SMART SX M-LINK,
please contact your model shop in the first instance, where
you will find practical advice freely given.
The addresses of our Service Centres can be found on our
website:
www.multiplex-rc.de
under CONTACT / SERVICE
the
ERVICE