NetComm NB5PLUS4/W User Manual page 82

RTS threshold
Frag­men­tation­ Threshold
Power Level
Option
Multi Domain­ Capability
Coun­try Strin­g­
Curren­t Reg­.
Private Reg­.
NB5Plus4/W User Guide

Period: The number of beacon frame
transmissions before frames, targeted
for stations operating in low-power
mode will be transmitted
Request To Send The number of bytes
in an MPDU below which an RTS/CTS
handshake will not be performed. The
default value is 2347, however, when 4x
is enabled on the setup page, the RTS
threshold value changes to 4096.
The minimum length of a frame that
will be fragmented. The default value
is 2346, however, when 4x is enabled
on the setup page, the fragmentation
threshold value changes to 4096.
The TX Output power percentage com-
paring to the maximum TX power: full,
50%, 25%, 12%, and 6%.
Description
This feature can only be configured on a
hidden page. It is not recommended for
the end users to configure this feature.
Please call NetComm support should you
need to change any of these settings.
Please call NetComm support should you
need to change any of these settings.
Please call NetComm support should you
need to change any of these settings.
Please call NetComm support should you
need to change any of these settings.
YML754Rev1
www.netcomm.com.au